Products: 3D PRINTED

AUD $25.00

3D PRINTED HILL - RIDGE - 6mm

P02

ONE AVAILABLE

3D PRINTED RIDGE-TOPPED HILL

  • Approx. measurements 7" x 6" x 3" high
  • Suitable for 6mm
  • Painted, flocked and ready to play.
  • Image shows both sides of hill
  • NOTE: P02 and P03 are the same hill, slightly different sizes
Width: 175 mm
Depth: 150 mm
Scale: 6mm
AUD $20.00

JUNGLE AREA - 15mm

P04

ONE AVAILABLE

  • Irregular-shaped jungle piece.
  • 3D printed plastic base, artificial foliage.
  • Measures approx. 6 1/2" x 6 1/2" at widest points (165mm x 165mm)
  • 15mm scale
  • Suitable for 'NAM'
  • Painted, flocked and ready to play.
Width: 165 mm
Depth: 165 mm
Scale: 15mm
AUD $28.00

3D PRINTED. OVAL-SHAPED DESERT w. PALM TREES 15mm

P25

3D PRINTED DESERT TERRAIN WITH PALMS

  • OVAL_SHAPED w. 10 PALM TREES
  • BASE MEASUREMENTS Approx. 320mm x 250mm. (12 1/2" x 10").
  • Suitable for 15mm
  • Fully painted and flocked. Ready to play.
May be used with multiple games.ONE AVAILABLE

Width: 320 mm
Depth: 250 mm
Scale: 20mm
AUD $175.00

3D PRINTED - 14 pce RIVER PACK - 2" WIDE RIVER

P27

14 pce 3D PRINTED RIVER PACK Comprises of

  • 5 STRAIGHTS each measuring approx. 29cm x 8cm. (Approx. 11 1/2" x 3 1/4") (4 with removable palm trees).
  • 2 FORDS approx. 15cm x 8cm. (Approx. 6" x 3 1/4")
  • 1 SECTION with BRIDGE approx. 15cm
  • 1 'Y' SECTION approx. 17cm x 11cm
  • 1 WATERFALL approx. 11.5cm x 12.5cm at widest point
  • 2 SMALL BENDS approx.7cm each
  • 2 SMALL STRAIGHTS approx.10cm each
  • River width is 5cm (2"), plus banks.
  • Suitable for 15mm
  • Fully painted and flocked. Ready to play.
ONE AVAILABLE

Width: 290 mm
Depth: 80 mm
Scale: 15mm
AUD $38.00

3D Printed Plastic HILL #1

P30

ONE AVAILABLE3D PRINTED HILL #1

  • BASE MEASUREMENTS Approx. 12" x 10" x 1 1/4" high (30cm x 25cm x 30mm)
  • Suitable for 15mm
  • Fully painted and flocked. Ready to play.
  • NOTE: #H1 and #H2 are the same hill, slightly different sizes

Width: 300 mm
Depth: 250 mm
Scale: 15mm
AUD $45.00

3D Printed Plastic HILL #2

P31

ONE AVAILABLE3D PRINTED HILL #H2

  • BASE MEASUREMENTS Approx. 12" x 10" x 1 3/4" high  (30cm x 25cm x 45mm)
  • Suitable for 15mm
  • Fully painted and flocked.  Ready to play.
  • NOTE: #H1 and #H2 are the same hill, slightly different sizes
May be used with multiple games.

Width: 300 mm
Depth: 250 mm
Scale: 15mm
AUD $18.00

3D Printed RUINED BUILDING / DICE TOWER. EUROPEAN. UNPAINTED 15mm.

PLA21

ONE AVAILABLE3D PRINTED PLASTIC (PLA+2)EUROPEAN RUINED HOUSE / DICE TOWERCan be used as a building, or as a dice tower.

  • BASE MEASUREMENTS Approx. 4 1/4" x 3 1/2" x 4 1/4" high  (110mm x 90 x 110mm high).
  • Made from PLA+2 plastic
  • Suitable for 15mm
  • UNPAINTED
Designed by KJ7574/Thingiverse

Width: 110 mm
Depth: 90 mm
Scale: 15mm
AUD $20.00

3D Printed RUINED BUILDING / SHOP. EUROPEAN. UNPAINTED 15mm

PLA22

ONE AVAILABLE

3D PRINTED PLASTIC (PLA+2)EUROPEAN RUINED BUILDING / SHOP
  • BASE MEASUREMENTS Approx. 6" x 4 1/4" x 2 1/2" high  (150mm x 110mm wide x 65mm high).
  • Made from PLA+2 plastic
  • Suitable for 15mm
  • UNPAINTED
Designed by KJ7574/Thingiverse
Width: 150 mm
Depth: 110 mm
Scale: 15mm
AUD $18.00

3D Printed HOUSE. RUINED BUILDING. EUROPEAN UNPAINTED 15mm. 2 PARTS

PLA26

ONE AVAILABLE

3D PRINTED PLASTIC (PLA+2)EUROPEAN RUINED HOUSE.
  • BASE MEASUREMENTS Approx. 4 1/4" x 3 1/2" x 3 1/3" high (105mm X 90mm X 80mm high)
  • Made from PLA+2 plastic
  • Suitable for 15mm
  • REMOVABLE ROOF SECTION
  • UNPAINTED
DESIGNER KJ7574 / Thingiverse
Width: 105 mm
Depth: 90 mm
Scale: 15mm
AUD $20.00

3D Printed HOUSE. RUINED BUILDING. EUROPEAN UNPAINTED 15mm. 3 PARTS

PLA16

ONE AVAILABLE

3D PRINTED PLASTIC (PLA+2)EUROPEAN RUINED HOUSE. - in 3 parts
  • BASE MEASUREMENTS Approx. 3 1/2" x 3 1/2" x 4" high (80mm x 90mm x 100mm high
  • Made from PLA+2 plastic
  • Suitable for 15mm
  • REMOVABLE SECTIONS AND ROOF (3 parts)
  • UNPAINTED.
Designed by KJ7574/Thingiverse
Width: 80 mm
Depth: 9 mm
Scale: 15mm

Scenery and Terrain for Miniature Wargames